The Jeep Wrangler is one of the few cars whose look and design haven’t changed much over the years. But even though the shock absorbers are made for off-road use and help your car handle hard hits, they can make the ride less comfortable.
Most people feel the full force of even small bumps in the road, especially if they are in the cabin. Even though Jeep has a complete and attractive style that has attracted a lot of people, it still has some problems when it comes to smooth riding. In this article, we’ll try to show you how to make your Jeep Wrangler ride smoother.
Why do Jeep Wranglers Ride so Rough?
When it comes to maintaining a Jeep Wrangler, most people neglect to check the tyres. Although they perform admirably off-road, their stiffer construction and harsher material make them less silent and more uncomfortable on the road than other tyres.
It’s common knowledge that most Jeep drivers push their cars beyond their limits, whether on or off-road. This leads to premature tyre wear and an overall less comfortable experience for everyone.
Jeep Wranglers ride hard due to the following reasons:
- Aerodynamics and wind resistance
- Spring Rate
- The alignment of the wheels
How to Make Jeep Wrangler Ride Smoother?
Improving the Jeep Wrangler’s ride quality requires modifying, upgrading, or replacing many components. The following are some suggestions for improving the Jeep’s ride quality for everyone within.
1. Change The Spring
Impacts are soaked up by the springs. Coil springs, used in newer Wrangler models, are far better at damping shock than their leaf spring predecessors.
Changing the springs in your Jeep is a simple way to improve the vehicle’s handling. You may customise your car’s handling and performance with new springs that come in a range of firmnesses.
2. Replace the shock dampeners
Old shock absorbers might provide for a bumpy ride in your Wrangler. Keep in mind that the job of the shock absorbers is to keep your vehicle level after driving over bumps or holes. Having it continually bounce off your car is avoided. However, you’re in for a bumpy ride if your Jeep has old dampeners.
If you plan on doing the bulk of your driving in a Jeep, it is advised that you swap out the factory dampeners for more road-friendly models. This is due to the fact that some designs are intentionally cumbersome for off-road use.
3. Swap The Tires
High traction is a primary design goal for off-road tyres. On smooth pavement, however, this high-quality grip tends to overcompensate, which can result in a ride that is jarring and uncomfortable.
You can get lesser tread tyres by switching out your high-functioning tyres. Your ride will feel more effortless as a result of there being less friction between your vehicle and the road caused by the reduced tread.
4. Camber Kit: Installing can Reduce the Impact
The installation of a camber kit on your car helps lessen the impact of bumps in the road. In case you’re not aware, this part helps smooth out the tyre racks, which in turn lessens the force exerted by bumps in the road.
Jeeps can’t be lowered without causing the wheels to be at unnatural angles. Because of this, the wheels will be working against each other, although the effect can be mitigated by installing a camber kit.
5. Steering: Rubber to Polyurethane bushings
Some items can impair the Jeep Wrangler’s right-hand drive. Jeep employs rubber bushings to dampen road vibrations. This bushing type flexes, compresses, and stretches over time. This impacts your ability to handle automobiles, especially on turns, reducing ride comfort and smoothness.
Polyurethane bushing is recommended to solve the problem. Polyurethane bushings are sturdy, inexpensive, and don’t compress or stretch, preventing alignment problems. This will improve your Jeep Wrangler’s ride on the road.
6. Make the Jeep Wrangler Heavier
A second way to improve the Jeep Wrangler’s ride quality is to load it down with extra weight. Reason being, heavier tyres have a better solid grip and absorb more of the shock of bumpy roads.
So, how can we best add weight to the vehicle? To do this, steel doors and a steel hardtop can be installed. This is due to the fact that putting on weight while riding a hefty steel vehicle may lessen the effects of bumpy roads. Don’t forget that doing so will keep you away from any buildings with canvas ceilings.
7. Try to Reduce the Vehicle’s Speed
Making some changes to your driving style can also have a noticeable effect on your level of ease. As a general rule, the faster you travel, the less pleasant your experience will be.
Reduced reaction time to shocks is expected. Those bumps on the path will have a greater impact. It will be much easier to spot misalignment. Additionally, the ambient noise level inside your Wrangler will increase significantly.
Going a little slower will make the ride more comfortable, but that’s easier said than done. Those riding along with you will appreciate it.
8. Check and Adjust Your Tire Pressure
The air pressure in your tyres is another factor that contributes to a comfortable ride. A ride that’s too stiff is the result of applying too much pressure, while applying too little results in a ride that’s too bouncy.
Of course, you’re free to experiment with different inflation pressures as long as you don’t exceed the manufacturer’s recommendations for your specific tires. Your driver-side door’s interior jamb will display these prices.
The ability to improve the Jeep Wrangler’s ride quality is a necessary skill for each owner. The vehicle’s design prioritises off-road performance, so it’s possible that you’ll have trouble keeping it under control while driving on the road. But there are things you can do inside the Jeep to make the ride more pleasant and smooth; the key is to discover the techniques that work best for your Jeep. If that doesn’t work, you can always seek outside help.
Frequently Asked Questions
How do I make my Jeep Wrangler ride softer?
How to Make a Jeep Wrangler Ride Smoother
1. Changing Tires. Changing your factory rubber all terrain treads with some softer passenger car tires can do wonders to improve your ride quality. …
2. Adding Rear Air Springs. …
3. Installing an Aftermarket Sway Bar Kit. …
4. Add a Set of Coil Spring Helper Springs.
How can I improve my Jeep suspension?
One way to improve the suspension of your Jeep is to purchase a suspension lift kit. This device will provide your Jeep with more suspension articulation as well as increase its ground clearance and allow you to outfit your vehicle with larger tires.
How do I make my 4×4 ride smoother?
You should consider installing high performance shock absorbers in your 4WD vehicle to improve the ride quality. This component is designed to minimise the effects of shock impulses in the vehicle, so it is critical for a smooth drive on uneven terrain.
Does a suspension lift improve ride quality?
A suspension lift allows for more suspension articulation, more ground clearance, and the ability to run even larger tires and all-around increases off-road capability.