A ball joint is a key component of any vehicle’s suspension system, and the Jeep Wrangler is no exception. If you find yourself in need of replacing a ball joint on your Wrangler, you might be wondering about the cost. This article will provide an estimate for Jeep Wrangler ball joint replacement cost, as well as some advice on where to get the best deal.
Ball Joint Replacement Service & Parts Chart
How much does a Ball Joint Replacement cost?
On average, the cost for a Jeep Wrangler Ball Joint Replacement is $190 with $100 for parts and $95 for labor. Prices may vary depending on your location.
|Jeep Wrangler Model||Cost|
|1989 Jeep Wrangler (Upper & Lower)||$190-$200|
|1999 Jeep Wrangler||$200-$230|
|2000 Jeep Wrangler||$210-$240|
|2001 Jeep Wrangler||$210-$240|
|2004 Jeep Wrangler||$250-$300|
|2005 Jeep Wrangler||$250-$300|
|2007 to 2018 Jeep Wrangler||$300-$450|
What is a ball joint?
A ball joint is a key component in your Jeep Wrangler’s suspension system. Ball joints connect the control arms to the steering knuckles and allow for up and down movement of the suspension. Over time, ball joints can wear out and need to be replaced. Depending on the severity of the wear, replacement can be done as a preventive measure or as a repair. Jeep Wrangler ball joint replacement cost will vary depending on your specific vehicle and the severity of the wear.
The function of a ball joint
A ball joint is a part of your car’s suspension system that connects the control arm to the steering knuckle. The ball joint allows the control arm to move up and down, as well as side to side, so that the wheels can follow the terrain. Over time, ball joints can wear out and need to be replaced. When this happens, you will likely notice a decrease in ride quality and handling.
You may also hear strange noises coming from the suspension area when driving over bumps. If you suspect that your car’s ball joints are worn out, it’s important to have them inspected and replaced as needed. Ball joint replacement is not a difficult or expensive repair, but it is important to have it done sooner rather than later to avoid further damage to your suspension system.
How many ball joints on a Jeep Wrangler
A Jeep Wrangler has a total of four ball joints, two on each front wheel. By pressing down on the control arm, you can free up space to remove the old upper ball joint. A total of two bolts secure the lower ball joints, which are located at the base of the front axle.
A breaker bar or impact gun can be used to remove them. Compressed air can also be used to break them free before removing them with hand tools if you have one on hand.
Ball joint failure
If your Wrangler clunks, you may need new ball joints. Here’s how to tell. If your Jeep Wrangler’s front tyres wear unevenly, check the ball joints.
If your Jeep’s ball joints are faulty, you may notice several symptoms. In extreme circumstances, bad ball joints can lead drivers to lose control of their cars. If you notice any of these symptoms, get your ball joints checked out.
How do you know if your ball joints are bad on a Jeep Wrangler?
If you have a Jeep Wrangler, it’s important to know when your ball joints need to be replaced. There are a few signs that can indicate that your ball joints are bad and need to be replaced.
One sign is if you hear a creaking noise when you turn the steering wheel. This is usually caused by the ball joint being loose and not providing the proper support to the suspension.
Another sign is if your Jeep starts to wander or drift while you’re driving. This can be caused by a number of things, but if you suspect it’s your ball joints, have them checked out by a mechanic.
Finally, if you see any cracks or damage on the ball joint itself, that’s a sure sign that it needs to be replaced. If you’re not sure, it’s always best to err on the side of caution and get it checked out by a professional.
Jeep Wrangler ball joint replacement cost
If your Jeep Wrangler ball joints have failed, it can be a costly repair. Depending on the severity of the failure, you may need to replace one or both of the ball joints. The cost to replace a ball joint can range from $150 to $400, depending on the make and model of your Jeep. If you have a Jeep with larger tires, you may need to pay more for the replacement.
The cost to replace a ball joint on a Jeep Wrangler will vary depending on the year of the vehicle and the severity of the damage. However, it is generally a relatively inexpensive repair.
If you have a Jeep Wrangler that is in need of a ball joint replacement, it is important to take it to a qualified mechanic. This is not a repair that should be attempted by someone who is not experienced in automotive repairs. Ball joint replacement is a delicate process and if not done correctly, could result in further damage to your vehicle.
Once you take your Jeep Wrangler to a qualified mechanic, they will be able to give you an estimate for the cost of the repair. Ball joint replacements are typically not very expensive, so you should not have to worry about breaking the bank to get your Jeep back on the road.
How long do Ball Joints last Jeep Wrangler?
The average lifespan of a ball joint is about 80,000-100,000 miles. However, this can vary depending on the make and model of your Jeep Wrangler. Some models may have ball joints that last longer, while others may need to be replaced more frequently. Ultimately, it is important to check your ball joints regularly and replace them when necessary to ensure optimal performance and safety.
How to replace Jeep Wrangler ball joints
If you’re like most Jeep Wrangler owners, you probably don’t think about your ball joints until something goes wrong. But these suspension components are actually crucial to the safety and performance of your vehicle.
Over time, ball joints can wear out and need to be replaced. This is especially true if you use your Jeep for off-roading or other activities that put extra stress on the suspension.
Fortunately, replacing ball joints on a Jeep Wrangler is not a difficult task. In fact, it’s something that most do-it-yourselfers can handle with just a few tools and some patience.
The most important thing to remember when replacing ball joints is to take your time and be careful. After all, you don’t want to damage any other suspension components in the process.
If you follow these simple steps, you’ll have your Jeep back on the road (or trail) in no time:
1. Jack up the front of your Jeep and support it with jack stands.
2. Remove the wheels so you can access the suspension components.
3. Using a wrench or socket, remove the nut that secures the ball joint to the control arm.
Frequently Asked Questions
How much does it cost to replace ball joints on a Jeep?
The average cost for a Jeep Wrangler ball joint replacement is between $200 to $300. Labor costs are estimated between $90 and $100 while parts are priced between $150 and $200.
How long does it take to replace ball joints on Jeep Wrangler?
Two-Four hours to replace ball joint.
How much is the labor to replace a ball joint?
Labor will vary by model and location. Jeep Wrangler cost as low as $80 to $90.
How many ball joints does a Jeep Wrangler have?
Jeep Wrangler have four ball joints in front of their suspension to connect the wheels to the system.
Do Jeep Wranglers have rear ball joints?
The rear doesn’t have ball joints, only the front so you can turn. The ball joints are a pivot point for the front knuckles to turn left and right.
How to Replace Jeep JK Ball Joints Full Guide
The cost of replacing ball joints on a Jeep Wrangler can vary depending on the model year and whether you do it yourself or have it done at a garage. However, on average, you can expect to pay between $200 and $400 for the parts and labor. If you’re experiencing issues with your ball joints, don’t delay in getting them replaced. Not only will it improve the performance of your Jeep Wrangler, but it will also help to extend its lifespan.